Bobcat 325/328 Excavator — 6902610-325-328 om 3-06(8).book

HYDRAULIC SYSTEM Figure PM-34 Checking And Adding Hydraulic Oil Put the machine on a flat level surface. Retract the arm and bucket cylinders, put the bucket on the ground and lower the blade. Stop the engine. Open the tailgate. Figure PM-33 1 2 P-49432 Check the condition of the fill strainer screen (Item 1) [Figure PM-34] . Clean or replace as necessary. Be sure the screen is installed before adding fluid. 1 Add the correct fluid to the reservoir until it is visible in the sight gauge. Check the cap and clean as necessary. Replace the cap if damaged. P-49431 Check the hydraulic fluid level, it must be visible in the sight gauge (Item 1) [Figure PM-33] . Install the cap. Close the tailgate.

Clean the surface around the reservoir (breather) cap and remove the cap from the reservoir (Item 2) [Figure PM-33] . 325/328 Excavator 77 Operation and Maintenance Manual