Cummins — Cummins CM2220 R2.8 Installation Guide R101B

Starting the Engine R2.8 CM2220 R101B Page 2-2 Section 2 - Start-Up and Troubleshooting Figure 2 - Lubricating Oil Drain Plug NOTE: Use a high-quality multiviscosity oil, such as Valvoline™ Premium Blue™, or its equivalent, in Cummins® engines. Choose the correct oil for your operating climate. Refer to Service Bulletin Cummins® Engine Oil and Oil Analysis Recommendations, Bulletin 3810340. Figure 3 - Valvoline™ Premium Blue™ WARNING To reduce the possibility of personal injury, avoid direct contact of hot oil with your skin. Some state and federal agencies have determined that used engine oil can be carcinogenic and cause reproductive toxicity.

Avoid inhalation of vapors, ingestion, and prolonged contact with used engine oil. If not reused, dispose of in accordance with local environmental regulations. WARNING Fill the lubricating oil pan with clean lubricating oil. Refer to Procedure 391-003 in Section 1 for lubricating oil system capacities. NOTE: Wait at least 5 minutes before measuring the oil level with the dipstick to allow the oil to drain to the pan. Figure 4 - Fill Engine with Oil To buy Cummins Parts and Service Manuals, Training Guides, or Tools go to our website at https://store.cummins.com