Cummins — Cummins CM2220 R2.8 Installation Guide R101B

R2.8 CM2220 R101B Electrical System Section 1 - Installation by Subsystem Page 1-47 The engine grid heater electrical power stud (1) is 6 mm [0.236 in]. Tighten to the following value. Torque Value: 5 N•m [ 44 in-lb ] Dash Displays Figure 14 - J1939 Cab Display The R2.8 CM2220 R101B Engine Kit includes a cab display within a small box within the crate. In the small box is a booklet outlining the functions and installation instructions from the manufacturer. The information in the booklet can also be found at the internet link below. NOTE: http://www.murphybyenovationcontrols.com/products/displays/pv25 The dash display reads engine parameters over the J1939 CAN Network.

Also provided on the engine harness is a 16 pin data link OBD connector. An electronic service tool can be connected to read engine parameters over the J1979 CAN network. See Figure 15. Figure 15 - Cab Components To buy Cummins Parts and Service Manuals, Training Guides, or Tools go to our website at https://store.cummins.com