RECONDITIONING THE ENGINE (S/N 528911001 & ABOVE AND S/N 528611001 & ABOVE) (CONT’D) Figure 60-81-51 Assembly (Cont'd) Figure 60-81-49 P-56930 Install the connecting rod bearing halves into the connecting rod [Figure 60-81-51] . P-56929 Figure 60-81-52 Measure the distance between the top edge of the crank pin (TDC) and cylinder head sealing surface at all cylinders [Figure 60-81-49] . Figure 60-81-50 A B CD-15560 Before installing piston/connecting rod assembly, make sure the piston ring gaps are staggered as shown in [Figure 60-81-52] . CD-15558 Compare actual dimension with the dimension listed [Figure 60-81-50] : Specifications: Piston Class A . . . . . . . . . . . . . . . . . . .
7.732-7.736 inch. (196,39-196,49 mm) Piston Class B . . . . . . . . . . . . . . . . . . . 7.736-7.744 inch. (196,491-196,69 mm) NOTE: If the crankshaft is undersize, 0.005 inch (0,125 mm) must be added to the dimension listed. 442 Excavator 60-81-15 Service Manual