COMPONENTS (S/N 522311001 & ABOVE) (CONT’D) Figure 70-50-6 Identification (Cont’d) Figure 70-50-5 2 1 2 6 1 3 3 5 5 P-32714 4 Fan Switch: This is a four position rotary switch (Item 1) [Figure 70-50-6] . When the fan switch is in the off position the A/C will not engage. P-36826 Expansion Valve: The expansion valve (Item 1) [Figure 70-50-5] controls the amount of refrigerant entering the evaporator coil. A/C Switch: The rocker switch (Item 2) [Figure 70-50-6] will be illuminated when the A/C is engaged. Temperature Control Lever: Push the lever (Item 3) [Figure 70-50-6] forward to increase the cab temperature; backward to decrease temperature Thermostat:
The thermostat (Item 2) [Figure 70-50-5] controls the temperature of the evaporator coil. Heater Coil: The heater coil (Item 3) [Figure 70-50-5] supplies the warm air into the cab by passing air through the coil. Evaporator Coil: The evaporator coil (Item 4) [Figure 70- 50-5] cools and dehumidifies the air before it enters the cab. Heater/Evaporator Blower: The blower (Item 5) [Figure 70-50-5] is used to push air through the heater and evaporator coils and into the cab. Heater Valve: The heater valve (Item 6) [Figure 70-50-5] is used to control the amount of engine coolant that flows to the heater coil. 442 Excavator 70-50-2 Service Manual