Bobcat Company 442 — Checking The Electrical System

BASIC TROUBLESHOOTING (CONT’D) Figure 70-80-40 Checking The Electrical System (Cont’d) Figure 70-80-38 P-63630 1 P-63628 1 Check the harness (Item 1) [Figure 70-80-40] for voltage. The voltage should be approximately 12 volts. Remove the switch panel (Item 1) [Figure 70-80-38] . If there is no voltage at the wiring harness, check the harness for broken wires. Figure 70-80-39 P-63629 1 Remove the wiring harness (Item 1) [Figure 70-80-39] . 442 Excavator 70-80-12 Service Manual