HYDRAULIC PISTON PUMP (S/N 522311001 & ABOVE) (CONT’D) Figure 20-50-151 Assembly (Cont’d) 1 Figure 20-50-149 1 2 P-35354 Install the retaining ball (Item 1) [Figure 20-50-151] on the three pins. N-23393 Figure 20-50-152 Install the swash plate (Item 1) on the shaft (Item 2) [Figure 20-50-149] . 1 Figure 20-50-150 3 2 1 2 P-35361 Install the retainer and piston assembly (Item 1) in the cylinder block (Item 2) [Figure 20-50-152] . N-15291 NOTE: It is NOT important that the pistons are installed in their original positions. Apply clean grease to the three pins (Item 1) [Figure 20- 50-150] and install them in the appropriate groove.
Install the washer (Item 2) and the spring (Item 3) [Figure 20-50-150] . NOTE: If the rotating group is damaged, the parts can not be order separately and must be ordered as an assembly. 442 Excavator 20-50-52 Service Manual