HYDRAULIC PISTON PUMP (S/N 522311001 & ABOVE) (CONT’D) Figure 20-50-155 Assembly (Cont’d) Figure 20-50-153 3 2 1 2 3 1 N-15299 To compress the spring inside the cylinder block, use a threaded rod (or bolt) (Item 1), 2 trimmed washers (Item 2) and 2 nuts (Item 3) [Figure 20-50-155] . P-35362 Figure 20-50-156 Install the shaft/swash plate assembly (Item 1) [Figure 20-50-153] in the cylinder block. Figure 20-50-154 2 1 3 N-15289 Install the threaded rod and nut (Item 1) through the modified washer (Item 2) and the block assembly (Item 3) [Figure 20-50-156] . N-15276 Lay the pump housing on its side and install the rotary group assembly, swash plate, and shaft in the housing [Figure 20-50-154] .
442 Excavator 20-50-53 Service Manual