ENGINE COMPONENTS AND TESTING (S/N 522311001 & ABOVE) (CONT’D) Fuel Injector Disassembly (Cont’d) NOTE: If the nozzle needle does not slide smoothly, wash the injector nozzle parts again in clean diesel fuel. Blow dry with compressed air. Re- do the procedure again. Replace the injectors as needed. Wash all new injectors in clean diesel fuel before installation. Figure 60-50-59 CD-15335 Check the seat surface of the adapter for wear. Make sure the centering pins are in place [Figure 60-50-59] . 442 Excavator 60-50-20 Service Manual