ENGINE COMPONENTS AND TESTING (S/N 522311001 & ABOVE) (CONT’D) Figure 60-50-62 Fuel Injector Assembly Figure 60-50-60 CD-15338 Install the thrust pin with the centering collar facing toward the compression spring [Figure 60-50-62] . CD-15336 Figure 60-50-63 Install the shim(s) [Figure 60-50-60] . The injector opening pressure is adjusted by selecting the correct amount of shim(s). A thicker shim will increase the opening pressure at the injector nozzle. Figure 60-50-61 CD-15339 Install the adapter with the centering pins toward the thrust pin [Figure 60-50-63] . CD-15337 Install the compression spring [Figure 60-50-61] . 442 Excavator 60-50-21 Service Manual