ENGINE COMPONENTS AND TESTING (S/N 522311001 & ABOVE) (CONT’D) Figure 60-50-66 Fuel Injector Assembly (Cont'd) Figure 60-50-64 CD-15342 Tighten the cap nut to 29-37 ft.-lb. (40-50 N•m) torque [Figure 60-50-66] . CD-15340 Check the injector nozzle on the nozzle tester before installation. (See Fuel Injector, Checking on Page 60-50- 18.) Install the injector nozzle, make sure the center bore fits over the centering pins of the adapter [Figure 60-50-64] . NOTE: Be careful that the nozzle needle does not fall out of the nozzle body. Figure 60-50-65 CD-15341 Install the nozzle cap nut [Figure 60-50-65] . 442 Excavator 60-50-22 Service Manual