Bobcat Company 442 — Engine Compression Checking

ENGINE COMPONENTS AND TESTING (S/N 528911001 & ABOVE AND S/N 528611001 & ABOVE) (CONT’D) Figure 60-51-6 Engine Compression Checking (Cont’d) Figure 60-51-4 1 P-56716 Install the injector retainer (Item 1) [Figure 60-51-6] and bolt. P-58313 Figure 60-51-7 Remove the injector (Item 1) [Figure 60-51-4] . Figure 60-51-5 1 P-56717 Connect the compression gauge (Item 1) [Figure 60-51- 7] to the adapter. P-56715 Turn the engine with the starter at 200 to 300 RPM. Run the test for each cylinder two times at 5 to 10 seconds each time and take the average reading. Install the compression adapter tool MEL-1433 [Figure 60-51-5] .

The correct compression of the engine is 319 - 392 PSI (22 - 27 bar) with no more than 15% difference between the cylinders. 442 Excavator 60-51-2 Service Manual