Komatsu — User Mode Selector Switch

OPERATION 2. On the 2-Way Attachment Select Menu, select one of the two set values for the oil flow, then press switch F6. The default values for the oil flow setting are both set to 430 l /min., as shown in the illustration on the right. To change the oil flow setting, follow the procedure given in “Changing Attachment Flow Setting” on page 2-57. The present oil flow set for ATT mode is marked with ATT in front of the item name as shown in the illustration on the right. If No 2-Way Attachment is selected, it becomes impossible to select the attachment mode on the working mode selection screen. On the working mode selection screen, it is not possible to select No 2-Way Attachment.

On the 2-Way Attachment Select Menu screen and 2-way attachment select menu, it is possible to carry out the following operations with switches F3 - F6. F3: Moves to next item (1 line down). F4: Moves to previous item (1 line up). F5: Returns to user menu. F6: Switches to setting screen for selected item. 2-56 PC200LC-8