Komatsu — User Mode Selector Switch

OPERATION Changing Attachment Flow Setting 1. Select 2-Way Attachment Oil Flow Setting (b) on the 2-Way Attachment Select menu screen, then press switch F6. 2. On the 2-Way Attachment Select Oil Flow Setting screen, select one of the two set values for the oil flow, then press switch F6. The default values for the oil flow setting are both set to 430 l /min., as shown in the illustration on the right. The present oil flow set for ATT mode is marked with ATT in front of the item. “No 2-Way Attachment” cannot be selected PC200LC-8 2-57