OPERATION Fuel Control Dial This dial (2) adjusts the engine speed and output. (a) Low idle (MIN): Turned fully to the left (b) Full speed (MAX): Turned fully to the right Cigarette Lighter This switch (3) is used when lighting cigarettes. When the cigarette lighter is pushed in, it will return to its original position after several seconds, so pull it out to use it. If the cigarette lighter is removed, the socket can be used as an 85W (24V x 3.5A) power source. Remark This cigarette lighter is for 24V. Do not use it as the power source for 12V equipment. Swing Lock Switch When not using the swing operation, e.g. when traveling, put the swing lock switch to the ON position.
On slopes, even when the swing lock switch is at the ON position, the weight of the work equipment may cause the upper structure to swing if the swing control lever is operated in the downhill direction. This switch (4) is used to lock the upper structure so that it cannot swing. (a) ON position: The swing lock is always applied, and the upper structure will not swing even if the swing is operated. In this condition, the swing lock lamp lights up. (b) OFF position: The swing lock is applied only when the swing control lever is in the neutral position, and released when operating the swing control lever.
The swing lock is actuated in five seconds after putting the swing control lever in the neutral position. 2-76 PC200LC-8