OPERATION Lamp Switch Switch (5) is used to turn on the front lamps, working lamps, additional lamps at top front of the cab, and monitor lighting. (a) Night position:. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Lamps light up and monitor illumination is set to night mode (b) Day position:. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Lamps light up and monitor illumination is set to day mode (c) OFF position: . . . . . . . . . . . . . . . . . . . . . . . . . . Lamps go out. (The monitor illumination is set to day mode.) Horn Switch Use this switch (6) to sound the horn.
Press the switch on the right work control lever to sound the horn. One Touch Power Max. Switch Use this knob switch (7) on the left control lever to actuate the power max. system Press it once (single click) and keep it pressed. In P and E modes, the power max function can be actuated for a maximum of only 8.5 seconds. Room Lamp Switch Remark It is possible to turn on the interior cab room lamp even when starting switch is in the OFF position, do not forget to turn it off. Use this switch (8) to light up the room lamp. (a) ON position: . . . . . . . . . . . . . . . . . . . . . . . . . . . Lamp lights up (b) OFF position: . . . . . . . . . . . . . . . . . . . . . . . . .
.Lamp goes out The room lamp lights up even when the starting switch is at the OFF position PC200LC-8 2-77