OPERATION Work Equipment Control Lever Left work equipment control lever (3) is used to operate the arm and upper structure. Arm operation (a) Arm OUT (b) Arm IN Swing operation (c) Swing to right (d) Swing to left N (Neutral) : The upper structure and arm are held in position and do not move. This Right work equipment control lever (4) is used to operate the boom and bucket. Boom operation (a) RAISE (b) LOWER Bucket operation (c) DUMP (d) CURL N (Neutral): The boom and bucket are held in position and do not move. 2-82 PC200LC-8