OPERATION SUN ROOF When leaving the operator's seat, set the lock lever securely to the LOCK position (L). If the lock lever (1) is in the FREE position (F) and the control lever is touched by mistake, this may lead to a serious accident. Opening 1. Set lock lever (1) securely to LOCK position (L). 2. Push up lock (A) in the front center of the roof window and check that the lock is released. Then hold grip (B) and push up the roof window. Closing Grip handle (B), then lower the sun roof and apply lock (A). If the lock does not click into position, open the sun roof and pull it down again.
WINDSHIELD When opening or closing the front window, bottom window, or door, always set the lock lever (1) in the LOCK position (L). If the control levers are not locked and they are touched by accident, it may lead to a serious accident. When opening or closing the window at the front of the cab, stop the machine on horizontal ground, lower the work equipment completely to the ground, stop the engine, then carry out the operation. When opening the front window, hold the grip securely with both hands, pull up, and do not let go until the automatic lock catch is locked. When closing the front window, the window will move quicker under its own weight.
Hold the grips securely with both hands when closing it. It is possible to stow (pull up) the front window in the roof of the operator's compartment. PC200LC-8 2-83