OPERATION AS/PS button This button (5) actuates the auto store and preset scan functions. Auto store If this button is pressed for more than two seconds during radio reception, a search is made automatically of the six station settings to find an unused preset number, and that frequency is stored in the preset memory. Preset scan If this button is pressed within two seconds, it is possible to select one of the already preset stations. Wait for six sec. after pressing the button and then press the button again to select the next preset station. If it is impossible to receive the preset frequency, the selection advances after one second to the next preset station.
Preset Station Buttons (1, 2, 3, 4, 5, 6) If this button (6) has been used to decide which stations to preset, it is possible to select the desired station at a touch. It is possible to preset six stations each for both AM and FM. For details of the method of presetting the stations, See “Controls of Radio” on page 2-108. Remark The preset button can be used to save the frequency manually. To save the frequency automatically, use the Auto store button. Display In this display (7), receiving band, frequency, preset No. and time are shown. Time Reset Button Use this button (8) when adjusting the time. For details of the method of adjusting the time, See “Controls of Radio” on page 2-108. H:
Hour M: Minute ADJ: Sets to 00 minutes Tuning Button Use this button (9) to change the frequency. For further details, See “Controls of Radio” on page 2-108. PC200LC-8 2-107