OPERATION Method of Operating Mode (BAS) Bass adjustment button: When button (2) is pressed, BAS is displayed on display (7). If knob (1) is turned clockwise within five seconds, the bass sound is emphasized. If the knob is turned counterclockwise, the bass sound is reduced. (TRE) Treble adjustment button: When button (2) pressed, TRE is displayed on display (7). If knob (1) is turned clockwise within five seconds, the treble sound is emphasized. If the knob is turned counterclockwise, the treble sound is reduced. (BAL) Balance adjustment button: When button (2) is pressed, BAL is displayed on display (7).
If knob (1) is turned clockwise within five seconds, the sound from the right speaker is increased. If the knob is turned counterclockwise, the sound from the left speaker is increased. When it is set to BAL 0, the sound from the left and right speakers is balanced. Remark With each mode, the display is returned automatically to its original setting after 5 seconds. Setting Correct Time 1. Press display selector button (4) to display the time. After five seconds, the display will return to the frequency display and the time cannot be corrected. If this happens, press display selector button (4) again. 2. Press time adjustment button (8) to set to Hour or Minute. H button:
Adjusts the hour (each time the button is pressed, the time advances by one hour) M button: Adjusts the minute (each time the button is pressed, the time advances by one minute) If the H or M button is kept pressed, the time will advance continuously until the button is released. ADJ button: When the ADJ button is pressed, the time is reset as follows. When display is 00 - 05 minutes, time is returned to 00 min. 00 sec. (No change in hour) When display is 55 - 59 minutes, time is advanced to 00 min. 00 sec. (Hour advances) When display is 06 - 54 minutes, time cannot be reset.
(Time stays same) Example 10:05 10:00 10:59 11:00 10:26 10:26 Use the H, M, and ADJ buttons to set to the correct time. PC200LC-8 2-109