OPERATION Antenna Before transporting the machine or putting it inside a building, store the antenna to prevent any interference. Stow the antenna as follows. 1. Loosen antenna mounting bolt (1) and store the antenna at position (A). 2. After storing the antenna, tighten bolt (1). Use Radio with Care To ensure safety, always keep the sound to a level where it is possible to hear outside sounds during operation. If water gets into the speaker case or radio, it may lead to an unexpected failure, so be careful not to get water on the equipment. Do not wipe the scales or buttons with benzene, thinner, or any other solvent. Wipe with a soft dry cloth.
Use a cloth soaked in alcohol if the equipment is extremely dirty. When the battery is replaced, the settings for the preset buttons are all cleared, so set them again. 2-110 PC200LC-8