Komatsu — Adjustment

OPERATION When installing mirrors (C) and (D), make sure to leave clearance (V) to prevent contact between the mirror and mirror stay. (V): Min. 10 mm (0.4 in) Adjusting Angle of Rear View Camera If the image on the monitor is not aligned correctly, remove cover (1) and adjust the mounting angle (A) of the rear view camera. Amount of adjustment of angle (A): . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Within a range of 35°-80° 1. When removing cover (1), insert a flat-headed screwdriver into the hole of cover (2), push the tooth on the inside, and remove the cover. 2. Remove two bolts (3). 3. Remove cover (1). 2-128 PC200LC-8