OPERATION Mirror (B) Adjust the mirror mount so that it is possible to see people at the rear right of the machine. Install the side view mirror in the location indicated in the figure at right. (M): 100 mm (3.9 in) If the side view mirror does not move smoothly when adjusting its angle, loosen mirror securing bolt (4) and mirror securing stay bolt (5). Torque of bolt (4):. . . . . . . . . . . . . . . . . . 4.0 - 5.4 N•m (3 - 4 lb/ft) When adjusting the side view mirror angle, make an adjustment so that the side of the machine comes into view on the mirror as shown in the figure at right.
Mirrors (C), (D) Adjust the side view mirrors so that people around 1 m away from the machine can be seen. (W): 1 m (3 ft 3 in) If side view mirror (C), (D) does not move smoothly when adjusting its angle, loosen mirror securing screw (6). Torque of screw (6): . . . . . . . . . . . . . 3.0 - 3.5 N•m (2.2 - 2.6 lb/ft) PC200LC-8 2-127