OPERATION Rearview Mirrors Always adjust the mirrors before starting operations. If the mirrors are not properly adjusted, it will be impossible to see properly, and there is danger that this may lead to serious personal injury. Mirror (A) Adjust the mirror mount so that it is possible to see people at the rear left of the machine. Install the side view mirror in the location indicated in the figure at right. (L): 120 mm (4.7 in) Fix mirror securing stay (1) the way the side view mirror stretches outward to the maximum. If the side view mirror does not move smoothly when adjusting its angle, loosen mirror securing bolt (2) and mirror securing stay bolt (3). Torque of bolt (2):. . . . . . . .
. . . . . . . . . . 4.0 - 5.4 N•m (3 - 4 lb/ft) When adjusting the side view mirror angle, make an adjustment so that the side of the machine comes into view on the mirror as shown in the figure at right. 2-126 PC200LC-8