Komatsu — Adjustment

OPERATION Adjusting seat height It is possible to move the seat up or down by combining adjustments forward tilt and rear tilt. After setting the forward tilt or rear tilt to the desired height, operate the opposite part to set the seat horizontal then secure in position. Height adjustment: . . . . . . . . . . . . . . . . . . . . . . . . . 60 mm (2.4 in) (D) Adjusting armrest height The height of armrest (5) can be adjusted up or down by changing the position of adjustment bolt (6) at the rear of the armrest. Armrest height adjustment: . . . . . . . . . . . . . . . . . .

33 mm (1.3 in) (E) Overall fore-and-aft adjustment of seat Move lever (7) to right, set to the desired position, then release the lever. In this case, the operator's seat, left and right control levers, and lock lever all slide together. Fore-and-aft adjustment: . . . . . . . . . . 180 mm (7.1 in) (9 stages) Turn knob (8) to the right to make the suspension harder, or to the left to make the suspension softer. Adjust the reading of the dial to match the operator's weight and select the optimum suspension. Remark To obtain the optimum adjustment, turn the knob (8) so that the indicator of the weight display (kg) in the transparent portion of knob (8) is the same as the operator's weight.

(F) Adjusting suspension (if equipped) PC200LC-8 2-125