OPERATION AFTER STARTING ENGINE To stop the engine in emergencies or when the actuation of the engine is abnormal or there is any other trouble, turn the key in the starting switch to the OFF position. Do not carry out operations or operate the levers or pedal suddenly while the hydraulic oil is at low temperature. Always carry out the warm-up operation for the hydraulic system until the hydraulic oil temperature monitor indicates that the hydraulic oil has reached the operating temperature range. Hydraulic oil temperature indicator (A) Display when temperature is within operating range: Monitor background (C) is blue (B) Display when temperature is low:
Monitor background (C) is white Hydraulically activated equipment may be effected if the warm-up process is not carried out completely. The effect may result in delayed control functions causing sluggish and/or jerky operation of the boom, arm, bucket, swing, and travel operations. Do not attempt normal machine operations until the hydraulic temperature indicator shows a blue background (described above as item (A)). There are two types of warm-up operation: Warm up the engine and Warm up the hydraulic equipment.
In addition, depending on the environment, the method of carrying out the warm-up operation may differ, so carry out the warm-up operation according to the items given in the appropriate section. (When only the engine is warmed up, the hydraulic equipment is not warmed up, so always carry out the warm-up operation for the hydraulic equipment separately from the warm-up operation for the engine.
Warm up the hydraulic equipment thoroughly ensures that the hydraulic oil is warmed up and that warm hydraulic oil circulates in all the control circuits.) Checking of Engine Startability and Noise When starting the engine, check that the engine causes no abnormal noise and that it starts up easily and smoothly. Check also that there is no abnormal noise when the engine is idling or when the revolution rises slightly. When there is an abnormal noise at the engine startup and if that condition continues, the engine may be damaged. In that case, ask your Komatsu distributor to check the engine as soon as possible.
Checking of Engine Acceleration and Deceleration When stopping the machine during the operation, check that there is no irregular engine revolution or that the engine does not stop suddenly. Check also that the engine speed rises smoothly when the fuel control dial is turned to the full (Max). Carry out these checks in a safe place, watching out for danger in the surroundings. When the engine performs very badly at low idling and in the acceleration and if that condition continues, the engine may be damaged or confuse the operator's sense of driving or lower the braking efficiency, and as a result lead to an unexpected accident.
In that case, ask your Komatsu distributor to check the engine as soon as possible. 2-138 PC200LC-8