Komatsu — Turbo Protect Function

OPERATION Turbo Protect Function The turbo protect function is a function to protect the turbocharger by keeping the engine speed at less than 1000 rpm immediately after the engine is started. When the turbo protect function is actuated, the engine speed is held at less than 1000 rpm, regardless of the position of the fuel control dial. When the turbo protect function is canceled, the engine speed is set to the speed for the position of the fuel control dial. The relationship between the length of time of actuating the turbo protect function and the temperature of the engine coolant is as shown in the table.

PC200LC-8 2-137 Coolant temperature Turbo protect time (sec.) Above 10 C (50 F) 0 10 to -30 C (50 to -22 F) Change 0 to 20 below -30 C (22 F) 20