OPERATION 6. Even if the engine starts, wait for the engine oil pressure monitor to go out. Do not touch the control levers or control pedal while the engine oil pressure monitor is lit up. Remark If the engine oil pressure monitor does not go out even after 4 to five seconds have passed, stop the engine immediately. Check the oil level, check for leakage of oil, and take the necessary action. Remark Regardless of the ambient temperature, it is possible to start the engine preheating manually. 1. Turn the key in starting switch (3) to the left from OFF position (A). The preheating monitor lights up and engine preheating starts.
(Preheating continues while the key in starting switch (3) is held at the left position.) During the preheating operation, the preheating monitor lights up to show that preheating is taking place. 2. The preheating monitor starts lighting about 30 seconds after preheating starts and then goes off in about ten seconds.. 3. Turn the key in starting switch (3) to the START position. The engine will start. If the engine cannot be started with the above procedure, wait for at least two minutes, then start again from Step 1. 2-136 PC200LC-8