Komatsu — Hydraulic System Warm-Up

OPERATION For attachment operations (if equipped), change the working mode to the attachment mode. Attachment operation One way (A) Other way (B) 18. Check that hydraulic oil temperature monitor (7) is displaying a blue background. If it is not, repeat Steps 6 to 10 until the blue background is displayed. (A) Display when temperature is in operating range: Monitor background (C) is blue (B) Display when temperature is low: Monitor background (C) is white If the hydraulic oil temperature monitor displays the blue background, the hydraulic system warm-up operation is completed.

After confirming that the hydraulic oil temperature monitor displays the blue background, carry out the following procedure. PC200LC-8 2-147