OPERATION 2. Turn fuel control dial (2) to lower the engine speed to low idle. 3. Lower the bucket horizontally until the bottom touches the ground. 4. Set lock lever (3) in the LOCK position (L). 5. Check the engine cooling water temperature and engine oil pressure with the machine monitor. If the coolant temperature gauge is in the red range, allow it to cool until the indicator enters the green range, then stop the engine. For details of the inspection and action to take, See “TROUBLES AND ACTIONS” on page 2-196. If the engine oil pressure monitor lights up, stop the engine immediately. For details of the inspection and action to take, See “TROUBLES AND ACTIONS” on page 2-196. 6.
Stop the engine. For details on the procedure for stopping the engine, See “STOPPING THE ENGINE” on page 2-150. 2-176 PC200LC-8