Komatsu — Transportation Procedure

OPERATION MACHINE INSPECTION AFTER DAILY WORK 1. Walk around the machine and check the work equipment, machine exterior, and undercarriage, also check for any leakage of oil or coolant. If any problems are found, repair them. 2. Fill the fuel tank. 3. Check the engine compartment for paper and debris. Clean out any paper and debris to avoid a fire hazard. 4. Remove any mud affixed to the undercarriage. LOCKING Always lock the following places. 1. Operator's cab door (1) Always close the window. 2. Fuel tank filler port (2) 3. Engine hood (3) 4. Battery box cover (4) 5. Left side door of the machine (5) 6. Right side door of the machine (6) 7. Hydraulic tank filler port (7) 8.

Air conditioner FRESH filter intake port (8) Remark Use the starting switch key to lock and unlock all these places. TRANSPORTATION When transporting the machine, observe all related laws and regulations, and be careful to assure safety. Transportation Procedure Select the method of transportation to match the weight and dimensions given in “SPECIFICATIONS” on page 4-2. Note that the weight and dimensions given in “SPECIFICATIONS” may differ according to the type of shoe or arm, or other attachments. Please consult your Komatsu distributor for details of the procedure for transporting machines with a protective guard installed for the operator's cab. PC200LC-8 2-177