Komatsu — Torque for Hoses (Taper Seal Type and Face Seal Type)

MAINTENANCE Torque for O-ring Boss Plugs Unless there are special instructions, tighten the O-ring boss plugs to the torque below. Torque for Hoses (Taper Seal Type and Face Seal Type) Tighten the hoses (taper seal type and face seal type) to the following torque, unless otherwise specified. Apply the following torque when the threads are coated (wet) with engine oil. PC200LC-8 3-15 Norminal No.

Thread diameter Width across flat Tightening torque (N•m {lbf lb}) mm mm Range Target 08 08 14 5.88 - 8.82 {4.33 - 6.50} 7.35 {5.42} 10 10 17 9.8 - 12.74 {7.22 - 9.39} 11.27 {8.31} 12 12 19 14.7 - 19.6 {10.84 - 14.45} 17.64 {13.01} 14 14 22 19.6 - 24.5 {14.45 - 18.07} 22.54 {16.62} 16 16 24 24.5 - 34.3 {18.07 - 25.29} 29.4 {21.68} 18 18 27 34.3 - 44.1 {25.29 - 32.52} 39.2 {28.91} 20 20 30 44.1 - 53.9 {32.52 - 39.75} 49.0 {36.14} 24 24 32 58.8 - 78.4 {43.36 - 57.82} 68.6 {50.59} 30 30 32 93.1 - 122.5 {68.66 - 90.35} 107.8 {79.50} 33 33 _ 107.8 - 147.0 {79.50 - 108.42} 124.4 {91.75} 36 36 36 127.4 - 176.4 {93.96 - 130.10} 151.9 {112.03} 42 42 _ 181.3 - 240.1 {133.72 - 177.08} 210.7 {155.40} 52 52 _ 274.4 - 367.5 {202.38 - 271.05} 323.4 {238.52} Nominal size of hose Width across flats Tightening torque (N•m {lbf ft}) Taper seal type Face seal type Range Target Thread size (mm) Nominal thread size - Threads per inch, Thread series Root diameter (mm) (Reference) 02 19 34 - 54 {25.0 - 39.8} 44 {32.4} - 9/16 - 18UN 14.3 34 - 63 {25.0 - 46.4} 44 {32.4} 14 - - 03 22 54 - 93 {39.8 - 68.5} 74 {54.5} - 11/16 -16UN 17.5 24 59 - 98 {43.5 - 72.2} 78 57.5} 18 - - 04 27 84 - 132 {61.9 - 97.3} 103 {75.9} 22 13/16 - 16UN 20.6 05 32 128 - 186 {94.4 - 137.1} 157 {115.7} 24 1 - 14UNS 25.4 06 36 177 - 245 {130.5 - 180.7} 216 {159.3} 30 1 3/16 - 12UN 30.2 (10) 41 177 - 245 {130.5 - 180.7} 216 {159.3} 33 - - (12) 46 197 - 294 {145.3 - 216.8} 245 {180.7} 36 - - (14) 55 246 - 343 {181.4 - 252.9} 294 {216.8} 42 - -