MAINTENANCE When Required Check, Clean and Replace Air Cleaner Element • When using compressed air, there is danger of dirt flying and causing personal injury. Always wear protective glasses, dust mask, or other protective equipment. • When removing the outer element from the air cleaner body, it is dangerous to pull it out by force. When working in high places or where the foothold is poor, be careful not to fall because of the reaction when pulling out the outer element. Remark • Do not clean the air cleaner element until the air cleaner clogging monitor on the monitor panel lights up.
If the element is cleaned frequently before the air cleaner clogging monitor lights up, the air cleaner will not be able to display its performance fully, and the cleaning efficiency will also go down. • In addition, during the cleaning operation, dirt stuck to the element will fall inside the inner element. If inspection, cleaning, or maintenance is carried out with the engine running, dirt will enter the engine and cause damage to the engine. Always stop the engine before carrying out these operations. Checking If air cleaner clogging monitor (1) of the monitor panel flashes, clean the air cleaner element.
Replacing Replace element, O-ring If the element has been used for one year, or air cleaner clogging monitor (1) on the monitor panel lights up after the element has been cleaned, replace outer element (5), inner element (6), and O-ring (8). Replacing vacuator valve Replace vacuator valve (4) if it is damaged or if the rubber is markedly deformed. 3-22 PC200LC-8