Komatsu — Check, Clean and Replace Air Cleaner Element

MAINTENANCE C. Remove one seal from the element whenever the element has been cleaned. 8. If small holes or thinner parts are found on the element when it is checked by shining a light through it after cleaning, replace the element. 9. Remove the cloth or tape covering inner element (6). Remark Do not use an element whose folds or gasket or seal are damaged. If the element or O-ring are cleaned and used again after they have been used for more than one year, it will cause problems. Do not use them again. 10. Check that there is no dirt or oil stuck to the seal portion of the new element or cleaned element. Wipe off any dirt or oil. 11.

Push the outer element in straight with your hand when installing it to the air cleaner body. If the outer element is held and rocked lightly up and down and to the left and right while pushing it in, the outer element can be inserted easily. Remark Be sure to install the air cleaner element facing in the correct direction. Install so that the bottom of the air cleaner element cylinder (face where no hole is drilled) (B), (C) is at cover (3) end. If the direction of installation is mistaken, there is danger that it will cause breakage of the air cleaner element or serious damage to the engine. 3-24 PC200LC-8