MAINTENANCE Check and Tighten Track Shoe Bolts If the machine is used with track shoe bolts (1) loose, they will break, so tighten any loose bolts immediately. Tightening Triple shoe and swamp shoe 1. First tighten to a torque of 490 ± 49 N·m (360 ± 36 lb/ft) then check that the nut and shoe are in close contact with the link contact surface. 2. After checking, tighten a further 120° ± 10°. Order for Tightening Tighten the bolts in the order shown in the diagram on the right. After tightening, check that the nut and shoe are in close contact with the link mating surface. PC200LC-8 3-33