MAINTENANCE Check Oil Level in Damper Case, Add Oil Parts and oil are at high temperature immediately after the engine is stopped and may cause serious burns. Wait for the oil temperature to go down before performing this operation. Remark Park the machine on flat ground and stop the engine. After waiting for more than 30 minutes after stopping the engine, check the oil level. 1. Open the cover on the right side of the machine. 2. Remove plug (G) and check the oil level. If the oil level is near the bottom of the plug hole, the oil amount is at a proper level. If found short, remove plug (F) and replenish oil through plug (F) filler port up to the bottom of plug (G) hole.
Remark If excess oil is supplied, drain it to the specified amount to avoid overheating. 3. Install plugs (G) and (F). 4. Close the door. 3-74 PC200LC-8