MAINTENANCE Every 4000 Hours Maintenance Maintenance for every 100, 250, 500, 1000 and 2000 hours service should be carried out at the same time. Check Water Pump Check for leakage of oil around the water pump. If any problem is found, contact your Komatsu distributor to have the parts disassembled, repaired, or replaced. Check Vibration Damper For the check and replacement of the vibration damper, special tools are required. Contact distributor for the replacement. It has to be replaced with a new one in the following cases. Mating mark (1) is notched both on the damper hub and on the inertia member of the vibration damper to show any misalignment between the two.
If this misalignment exceeds 1.6 mm (0.063 in), or if there is any dent found on the damper metal surface deeper than 3.2 mm (0.1 in), then (2) the vibration damper must be replaced. Check Starting Motor Contact your Komatsu distributor to have the starting motor checked. If the engine is started frequently, have this inspection carried out every 1000 hours. 3-84 PC200LC-8