Komatsu — Attachment Control Pedal

OPTIONS, ATTACHMENTS Selector Valve This valve (2) switches the flow of hydraulic oil. It is automatically switched according to the selected working mode. It is necessary to switch the working mode to match the attachment that is installed. For details of switching the working mode, see “HYDRAULIC CIRCUIT” on page 5-8. Remark If a service circuit from the attachment maker has been added, the return circuit may not switch automatically. Attachment Control Pedal Do not carry out operations with your foot on the pedal. If the pedal is depressed by mistake, the attachment may suddenly move and cause a serious accident. Lock the pedal with the lock pin when you are not operating the attachment.

This pedal (3) is used to control the attachment. When the front, center (neutral), and rear of the pedal are depressed, the movement of the attachment is as follows. Hydraulic breaker Front of pedal (A): Actuated Center of pedal (N): Stopped Rear of pedal (B): Stopped Regarding other attachments, hold a meeting with the attachment maker at the time of installation to confirm the operation of the pedal and attachment before using it. PC200LC-8 5-5