OPTIONS, ATTACHMENTS Replace Additional Breaker Filter Element Immediately after operating the engine, all parts still retain high temperature. Never replace the filter in such condition. Replace it only after each part has sufficiently cooled. Remark For details of the replacement interval for the element, see “Maintenance Interval for Hydraulic Breaker” on page 3-20. Prepare a container to catch the oil. 1. Lower the work equipment to the ground and stop the engine. 2. Turn the starting switch to the ON position (B), then set the lock lever to the FREE position (F). 3.
Operate each work equipment control lever and the attachment control pedal back and forth, left and right at full stroke two to three times to eliminate the internal pressure in the hydraulic circuit. PC200LC-8 5-11