Komatsu — Replace Additional Breaker Filter Element

OPTIONS, ATTACHMENTS 4. Set the lock lever to LOCK position (L). 5. Loosen slowly oil filler cap (F) on top of the hydraulic tank to eliminate the internal pressure in the hydraulic circuit. 6. Place a container under the filter element to catch the oil. 7. Set a container in position to catch the drained oil, then remove plug (3) and drain the oil accumulated in filter case (1). 8. Check that the hydraulic oil is at room temperature, then turn filter case (1) to the left to remove it, and take out element (2). 5-12 PC200LC-8