SPECIFICATIONS SECTION 6 Page 11 TORQUES VALVES FOR STANDARD METRIC FASTENERS NOMINAL THREAD DIAMETER [mm] STANDARD TORQUE ± 10% [Nm] 6 7 8 10 12 14 16 18 20 22 24 27 30 33 36 10 16 23 46 80 125 200 275 385 530 670 980 1330 1790 2325 6.6. TORQUE VALUES FOR STANDARD ENGLISH FASTENERS This chart provides tightening torque for general purpose applications using original equipment standard hardware as listed in the Parts Catalog for the machine involved. DO NOT SUBSTITUTE.
Original equipment standard hardware is defined as Type 8, coarse thread bolts and nuts and thru hardened flat washers (Rockwell "C" 38-45), all phosphate coated and assembled without supplemental lubrication (as received condition). Phosphate coated bolts used in tapped holes in steel or gray iron, phosphate coated bolts used with phosphate coated prevailing torque nuts (nuts with distorted threads or plastic inserts). Phosphate coated bolts used with copper plated weld nuts. Markings on bolt heads or nuts indicate material grade ONLY and are NOT to be used to determine required torque.
NOMINAL THREAD DIAMETER [in] STANDARD TORQUE ± 10% [Nm] ј 5/16 3/8 7/16 Ѕ 9/16 5/8 ѕ 7/8 1 1-1/8 1- 1/4 1- 3/8 1- 1/2 1- 3/4 2 10 21 38 60 92 130 180 325 520 780 1110 1565 2050 2720 3380 5080 TD-15H DRESSTA