Mitsubishi — Mitsubishi Diesel Engine Service Manual

ELECTRICAL SYSTEM - DISASSEMBLY, INSPECTION AND REASSEMBLY (e) Armature coil continuity Measure between the commutator segment and the armature coil. There should be no continuity. If continuity is indicated, replace the armature. (f) Armature coil open circuit Measure between the segments in various combinations. There should be continuity. If no continuity, replace the armature. (3) Inspecting the field coils (M008T70471A, M008T81071A) (a) There should be no continuity between the coil end (brush) and the yoke. (b) There should be continuity between the coils (brushes). (c) The pole-shoes and the coils should not be loose. If faulty, replace the yoke.

(4) Inspecting the bearings Ensure that the bearings rotate smoothly without abnormal noise. If faulty, replace. (5) Inspecting the rear bracket If the metal is worn, replace the rear bracket. Testing the armature coil Testing the armature coil for open circuit Inspecting the field coils 7 - 14