Mitsubishi — Mitsubishi Diesel Engine Service Manual

ENGINE - INSPECTION / ADJUSTMENT, RUNNING-IN TRIAL AND PERFORMANCE TEST 1.10 Inspecting the V-belt tension (1) Press the V-belt at the midpoint of the alternator pulley and the crankshaft pulley, and measure the deflection of the belt. Unit: mm (in.) Adjusting bolt 10 to 12 mm (0.4 to 0.5 in.) Deflection of 10 to 12mm (0.4 to 0.5 in.) {when pressed with a force of approx. 98 N (10 kgf) [22.0 lbf]} Adjusting the V-belt tension (2) If the measured deflection does not conform to the standard value, loosen the adjusting bolt and move the alternator for adjustment. 8 - 11 Standard value V-belt tension {belt deflection when pressed with a force of approx.

98 N (10 kgf) [22.0 lbf]} 10 to 12 (0.4 to 0.5)