ENGINE MAIN PARTS - INSPECTION AND CORRECTION 2.4 Measuring the clearance between the idler gear and the idler shaft Measure the inner diameter of the idler gear. Measure the idler shaft diameter. If the difference between the two exceeds the limit, replace the idler gear or the idler shaft. Unit: mm (in.) Measuring direction Measuring location 2.5 Replacing the idler shaft When installing the idler shaft into the cylinder block, observe the dimension indicated. 2.6 Measuring the clearance between the camshaft journal and the bushing Measure the camshaft journal diameter. Measure the inner diameter of the bushing on the cylinder block.
If the difference between them exceeds the limit, replace the bushing. Unit: mm (in.) Measuring the idler gear-to-shaft clearance 26.5 0.5 mm (1.04 0.02 in.) Replacing the idler shaft Measuring location Measuring direction Measuring the camshaft journal diameter Measuring the camshaft bushing inner diameter 2 - 24 Standard value Limit Idler gear-to-shaft clearance 0.020 to 0.070 (0.0008 to 0.0028) 0.200 (0.0079) Standard value Limit Camshaft journal-to-bushing clearance 0.050 to 0.125 (0.0020 to 0.0049) 0.150 (0.0059)