Mitsubishi — Mitsubishi Diesel Engine Service Manual

ENGINE MAIN PARTS - INSPECTION AND CORRECTION 2.11 Inspecting the cam-to-tappet contact Inspect the tappet contact face with the cam. If abnormally worn, replace the tappet. 2.12 Measuring the clearance between the tappet and the tappet guide Measure the tappet diameter. Measure the tappet guide bore in the cylinder block. If the difference between them exceeds the limit, replace the tappet. Unit: mm (in.) Good Bad Bad Cam-to-tappet contact Measuring direction Measuring direction Measuring the clearance between the tappet and the tappet guide 2 - 26 Limit Tappet-to-guide clearance 0.150 (0.0059)