ENGINE MAIN PARTS - REASSEMBLY Note: (a) Apply sealant in a bead of 4 mm (0.1575 in.) and in the illustrated pattern. (b) Cutting the end of the sealant tube at the illustrated location will provide a 4 mm (0.1575 in.) bead. (2) Tighten the oil pan retaining bolts diagonally in several steps, and finally to the specified torque. R17 (4 front and rear locations in total) Apply sealant as lined 9.5 mm (0.37 in.) R7 from hole center (same for all 17 holes) 36 mm (1.42 in.) Rear Front R40 corresponding to hole centers (same for all 4 corners) 5 mm (0.20 in.) Apply oil pan liquid gasket here (top face) Sealant application pattern Cut here Cutting the end of sealant tube Tightening torque:
9.80 to 12.7 N m (1.0 to 1.3 kgf m) [7.2 to 9.4 lbf ft] Installing the oil pan 2 - 39