. MAINTENANCE MAINTENANCE PROCEDURE CHECK AIR CONDITIONER COMPRESSOR BELT TENSION, ADJUST in). Adjustment with the bolt (2) (3) and then 4 - 50 at a point midway between the drive pulley (1) 1. y (1) and compresso r pulley (2) with a finger forc e of approx. 5 8.8 N (6 kgf) and che ck that the deflection is 5 to 8 mm (0.20 to 0.31 1. Loosen bolts (1 Bracket (4) holds the compressor in pla loosened, bracke sition as a fulcrum ) attached to the tighten bolt (6). (6) so that the de to 0.31 in) (appro flection of x. 58.8N (6 3. 4. Tighten bolts ( Loosen bolt (6) 1) and (2) to secu to remove from b re bracket racket (4). 5.
Tighten nut (5) NOTICE Check each pulley for damage, wear o f the V-groov e, and wear of t he V-belt. In particular, be sure to c heck that the V-belt is no touching the botto m of the V-groove. sk the Komatsu distributor in your territory to replace the belts with new ones. little allowance for adjustment. coming from the belt. after one hour of operation. In case any of the following occurs, a sk the Koma tsu distributor in your territory to replace the belt • The fan belt has elongated, leaving little allowa nce for adjustm • A cut or crack is found on the belt. • Slipping or crea king sound is heard coming fro When the new V-b elt is set, readjust it after one h our of operation