Komatsu — CHANGE OIL IN FINAL DRIVE CASE

. MAINTENANCE MAINTENANCE PROCEDURE CHANGE OIL IN FINAL DRIVE CASE WARNING 4 - 60 The oil i s at high temperatur e immediately after the machi ne has been operated. Wait for the oil to cool down before starting the oper ation. If there i s still pressure rema ining inside the cas e, the oil or plug may f ly Loosen the plug slowly to re lease the pressure. Refill c apacity (each): 2.5 liters (0.66 US g Prepar e a hexagon wren 1. Set pl ug (F) at the top, w ith plug (F) and pl ug (P) pe rpendicular to the ground surface. ug (P) to catch the oil. 2. Set a container under pl ug (P) to catch th 3. Remo ve plugs (P) and ( F) with the hexag on wrenc h and drain the oil . n plug (P). 4. Tighte 5.

Add th e replacement am ount of oil through the hole of plug (F). 6. When the oil overflows fr om the hole of plu g (F), ins tall plug (F). Large-capacity Final Drive (If equipp 1. 2. 3. 4. 5. 6. 1. Set so perpendicular to the gro 2. Set th e container to cat ch oil under plug ( 3. Remo ve plugs (P), (G) a nd (F) with hexagonal we nch to drain the oil . n plug (P). 4. Tighte 5. Add th e replacement am ount of oil through the hole of plug (F). 6. After t he oil flows out of the hole plug (G), install pl ugs (G) and (F).