MAN — MAN DD13 DD15 Engine Application Installation Manual

DD PLATFORM APPLICATION AND INSTALLATION MANUAL Coolant Level Sensor (CLS) — A radiator top tank or remote surge tank mounted sensor J1939 — Panel mounted Deutsch diagnostic connector Malfunction Indicator Lamp (MIL) — Panel mounted amber indicator light to indicate faulty sensors High Exhaust Stationary Temp (HEST) Lamp — Panel mounted indicator light to indicate high exhaust temps during DPF regeneration DPF Regen Active Lamp — Panel mounted indicator light to indicate DPF regeneration Manual DPF Regen Request Switch — Panel mounted selector switch to request a regeneration event.

Refer to DDEC VI Application and Installation Manual (DDC-SVC-MAN-0054) for more information and schematic diagrams. 14.3 MOTOR CONTROL MODULE The engine mounted MCM includes control logic to provide overall engine management. 1. 21 Pin 2. 120 Pin Figure 14-1 Motor Control Module The MCM continuously performs self diagnostic checks and monitors the other system components. System diagnostic checks are made at ignition-on and continue throughout all engine operating modes. The nameplate on the MCM shows the manufacturer's specifications and is important for assisting operator or maintenance personnel.

14.4 COMMON POWERTRAIN CONTROLLER The vehicle mounted CPC includes control logic to provide overall vehicle management. All information subject to change without notice. 14-3 DDC-SVC-MAN-0073 Copyright © 2009 DETROIT DIESEL CORPORATION