CYLINDER HEAD ASSEMBLY 2-74 VALVE SEAT RING REPLACEMENT 1. If the valve seat insert is excessively worn, cut the insert ring wall as shown in the illustration 0.5~1.0mm 0.3mmR D using a valve seat cutter at a normal temperature. A Old hole H Removal New hole A B 0.15~0.3mm L4GC118A 2. After removing the seat ring, Cut the seat insert bore as same size as the following table using a reamer or cutter. 3. Heat the cylinder head to 250°C and press-fit the oversize seat. At this time the oversize seat ring maintains a normal room temperature. After installing a new valve seat, correct the valve seat surface.
Valve seat ring oversize Item Size (mm) Size mark Cylinder insert height H (mm) Cylinder head I.D (mm) Intake valve seat ring 0.3 OS 30 7.5 ~ 7.7 33.330 ~ 33.325 0.6 OS 60 7.8 ~ 8.0 33.600 ~ 33.625 Exhaust valve seat ring 0.3 OS 30 7.9 ~ 8.1 28.800 ~ 28.821 0.6 OS 60 8.2 ~ 8.4 29.100 ~ 29.121